About this 3D model

**PERSONAL USE ONLY**For Commercial Licence please join the Tier of your choice on our Patreon. https://www.patreon.com/cw/AdAstra3DPrints Unseal the magic of the North.Inspired by the intricate puzzle chests found throughout the frozen realms of Norse mythology, this Nornir Rare Chest is the ultimate collectible. You can paint it with acrylics or in the slicer with an AMS /CFS Compatible printer.For the small rings I used regular jump rings. 3D PRINTING SETTINGS FDM Printers3 walls10-15% infill0.20 Layer HeightInstructions for Supports: The Top part can take the default supports your slicer will generate.The Bottom Part at the default size does not need supports on the "Pillars". Only the dragons will need supports.If you intend to print bigger than the default size then you should also add supports on the pillars.Initially i would put supports at the pillars holding the dragon heads, until i realised it was not needed, at least at the default size which is 11 cm length (including the dragons) at 0.20 layer height.If you intend to print bigger than that then supports might be needed for the pillar parts. Dragons will always need supports to be printed.After printing i would paint it and decorate with gold jump rings.