About this 3D model

This is a sanding wedge for sanding small and large components. 16 sanding wedges from XS-L in various widths The sanding wedge is relatively simple in construction. You wrap the sandpaper around the base body and wedge it in with the wedge. When tightening the screw, the sandpaper is pulled taut. In addition, there is a small tool for loosening and tightening the screw -I generally recommend PETG for mechanical parts. -Base body and wedge are no problem in PLA. -The screw is a mechanical part. -In my test, the screw was stable enough in PLA+ -If there is a problem with the durability of the screw, you should use PETG Size XS 12.5mm width, 68mm length, sandpaper strip 150mm length 15.0mm width, 68mm length, sandpaper strip 150mm length 20.0mm width, 68mm length, sandpaper strip 150mm length 25.0mm width, 68mm length, sandpaper strip 150mm length Size S 19.0mm width, 101mm length, sandpaper strip 220mm length 22.5mm width, 101mm length, sandpaper strip 220mm length 30.0mm width, 101mm length, sandpaper strip 220mm length 37.5mm width, 101mm length, sandpaper strip 220mm length Size M 25.0mm width, 135mm length, sandpaper strip 295mm length 30.0mm width, 135mm length, sandpaper strip 295mm length 40.0mm width, 135mm length, sandpaper strip 295mm length 50.0mm width, 135mm length, sandpaper strip 295mm length Size L 31.0mm width, 168mm length, sandpaper strip 370mm length 37.5mm width, 168mm length, sandpaper strip 370mm length 50.0mm width, 168mm length, sandpaper strip 370mm length 62.5mm width, 168mm length, sandpaper strip 370mm length