About this 3D model

Cake Stand - Support-Free .STL This listing includes 3 stands: Small cake stand: 9.5 cm × 3.5 cm (3.74 in × 1.38 in) — 1 piece Big cake stand: 16 cm × 6 cm (6.30 in × 2.36 in) — 1 piece Two-tier cake stand: 16 cm × 9.5 cm (6.30 in × 3.74 in) — 3 pieces: top, connector, bottom With some filaments, the connector may fit too tightly (or too loosely). Please consider increasing or decreasing the size by 2–3%. If you want to scale the two-tier cake stand up or down, you will need to apply the same scale to all of the pieces (top, bottom, and connector). By downloading this item, you agree: - Not to distribute this file - Not to sell prints of this item Only Merchants with an active License may print & sell PuffPuffPastries items. ?MMF: https://www.myminifactory.com/users/PuffPuffPastries3D# ?PATREON: https://www.patreon.com/c/PuffPuffPastries All my files are designed to be 3D Printed easily without supports! This model has been thoroughly checked and test-printed to ensure high-quality results. It has been specifically designed for optimal performance on FDM printers and prints completely SUPPORT-FREE, making the process hassle-free and efficient. The print has been successfully tested on a Prusa MK4S with 15% infill, ensuring excellent structural integrity and print quality. While the model can also be printed on resin printers, pre-supported files are not included. If you wish to print using a resin printer, you will need to generate and apply your own supports to achieve the desired outcome. For those getting ready to print, here are my recommended settings: ? Filament: PLA ? Nozzle Temp: 230°C ?️ Bed Temp: 65°C ? Infill: 15% ? Layer Height: 0.2mm ? Supports: Not needed! ⚠️ Brim: Not necessary for me, but if your printer has lower bed adhesion, I’d recommend using one for extra stability! Whether you’re a hobbyist or a seasoned 3D printing enthusiast, this model offers flexibility, ease of use, and stunning results. Get ready to bring your ideas to life!