About this 3D model

There are 2 print profile: one with AMS and one without AMS. If you don't have AMS you need to manually change the filament at the proper layer (see below). Be careful to properly flush the filament during the loading of the new filament to avoid color mixtures . Feel free to scale at your needs, but remember to lock the z-axis to 100%. If you like it, look at my other HueForge Artworks here . Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ ELEGOO Black Transmission Distance: 1.7 PLA BambuLab Tough Pine Green Transmission Distance: 1.5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 7.2 Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Pine Green At layer #12 (1.04mm) swap to BambuLab Green At layer #14 (1.2mm) swap to White for the rest.