About this 3D model

Center Console Cup Holder for the S13 240SX Files have been deleted since people want to resell. I got the idea from the R32 Optional Cupholder , which sits inside the center console. I was going to remake it exactly but couldn't since the dimensions of the S13 cup holder and it wasn't meant to have one inside. One cup holder has a diameter of 71mm and a height of 47mm, big enough to hold a soda can, the other has a diameter of 87mm with a height of 47mm, and a smaller hole with diameter of 69mm a height of 37mm. The reason for the smaller hole is for spacing, like I said, these center consoles were not meant to house a cup holder. The center console will still close with this installed. MAIN WEBSITE FOR CONTACT IS ON PRINTABLES, DO NOT EXPECT A REPLY IF IT'S NOT ON THERE. “S13 Cup Holder - Keylon” Print settings: Printer: BambuLabs P1S Material: PETG Nozzle: 0.4mm Layer Height: 0.2mm Infill: 30% Infill Pattern: Adaptive Cubic Supports: Normal(can use tree, whatever you prefer) Brim: None Walls: 3 Estimated filament usage: 350g Estimated print time: 8 hours Install Should directly fit in the center console. The center console can still close, and stays up firmly when opened. Can add double sided tape to the underside to keep firm. If you want anything added or modified and don't know how, feel free to send me a message.