About this 3D model

Humanoids doing yoga, because they need it too! Check out the whole series on my profile. Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below. Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.8 PLA BambuLab Matte Dark Green Transmission Distance: 1 PLA BambuLab Matte Grass Green Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #3 (0.72mm) swap to Dark Green At layer #5 (1.12mm) swap to Grass Green At layer #6 (1.32mm) swap to Jade White for the rest.