About this 3D model
As I got some requests, I want to share with you the Luffy Gear 5 HueForge print I made. The print is rather complex and consists of multiple single print which are glued together afterwards. Instructions for each single print and the filaments I used for each of them are listed below. I also prepared print profiles for each single print. Feel free to use them and adjust the filaments to the ones you have or want to use. Happy printing! _________________________ Print 1: Back Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #6 (0.56mm) swap to Grey At layer #10 (0.88mm) swap to White for the rest. Print 2: Belt Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA+ IIID Max Mystic Purple Transmission Distance: 6 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 Swap Instructions: Start with Charcoal At layer #3 (0.32mm) swap to Mystic Purple At layer #12 (1.04mm) swap to Sakura Pink for the rest. Print 3: Skin Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Dark Brown At layer #10 (0.88mm) swap to Beige for the rest. Print 4: Hat & Face Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA Default White Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #5 (0.48mm) swap to Dark Red At layer #8 (0.72mm) swap to Dark Brown At layer #12 (1.04mm) swap to Latte Brown At layer #15 (1.28mm) swap to White for the rest.