About this 3D model

If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated! I'll be looking forward to interact with you guys and our shared passion for making! :) https://www.buymeacoffee.com/flobi ________________________________________________________________________________________________________________ I got my first 3d Printer and thought i would challenge myself to design my own files and rework others awesome designs, to hopefully make a nice enclosure for my Creality Ender V3 KE. The enclosure should work just fine with other printers as well. But since the Ender v3 KE is to freaking tall, i needed an alternative solution, since the unit wouldn't fit a normal IKEA Platsa cabinet. So… I moved the filament runout sensor to just above the print head. By doing that i could save filament when a runout is detected, and remove weight from the gantry as well. Cabinet prepare instructions: To be continued… :) Parts list: 1x Runout Sensor Print Head Mount 1x Runout Sensor Print Head Mount - Washer 1x Runout Sensor Chamber - Buttom Part 1x Runout Sensor Chamber - Top Part 1x Spool Holder - Stand - Back Left 1x Spool Holder - Stand - Back Right 1x Spool Holder - Stand - Front Left 1x Spool Holder - Stand - Front Right 2x Spool Holder - Rod 4x Spool Holder - Nut 4x Spool Holder - Bearing Interfacing Bolt (Fully 3D Printed or 608 Edition) 4x Spool Holder - Bearing (Fully 3D Printed or 608 Edition Print instructions: All files prints very nicely on the Ender V3 KE. The only things i changed in the print settings are the following: - Build Plate Adhesion (Brim) - Support Structure - Support Pattern - Infill Density - Infill Pattern Follow the below matrix to achieve the same great results as i got: Parts Quality Support Infill Brim Runout Sensor Print Head Mount - Washer 0.2mm No 10% Gyroid No Runout Sensor - Print Head Mount 0.2mm Normal - Gyroid 10% Gyroid No Runout Sensor - Chamber - Top+Buttom 0.2mm No 10% Gyroid No Spool Holder - Stand - BR+BF+BL+FL 0.2mm No 10% Gyroid No Spool Holder - Pin 0.2mm Normal - Gyroid 10% Gyroid No Spool Holder - Bearing Interfacing Bolt 0.2mm Normal - Gyroid 10% Gyroid No Spool Holder - Bearing 0.2mm No No No Spool Holder - Nut 0.2mm No 10% Gyroid No ________________________________________________________________________________________________________________ Special thanks to the folowing people for making AMAZING designs for me to remix: Michal Fanta Gravity spoolholder for MMU2S https://www.printables.com/model/10370-gravity-spoolholder-for-mmu2s