About this 3D model

These quick-to-print label holders snap right on your drawers. Designed to stay in place without any need for glue, screws, or tape. The labels itself can be added as well without any need for glue, tape or whatever - Either print a 10.5x50mm label on some plain paper, use a label printer/cricut, or use “Make My Sign” to create 3D printed labels that snap right into the holder snugly. This model is designed for use with a 0.4mm nozzle or smaller! Why are these so good? Minimal design doesn't protrude much, and looks clean Fits perfectly snug and holds in place on various IKEA drawers, tested on: Alex Nordli Besta Platsa Should work on any 16-ish mm drawers Multifunctional, use any kind of label you want. Fitting in place without needing to permanently attach it Customisable, use “Make My Sign” to customize the text and look Quick and easy print, if using a well-calibrated 3D printer - nothing else needed Economic, Only use a tiny bit of filament Tight tolerances to snap everything snugly in place Included are 2 Raw files containing the following: A PDF template with blank labels you can print on a regular printer and handwrite on yourself and slide right in Please cut them within the printed borders or they will be too high to slide in If you wish to make your own printed design use 10.4mmx50mm for your borders. A JSON template that you can import into “Make My Sign” to 3d print a label with text in 2 colors In “Make My Sign” click “Create from Blank”, then "Import template (JSON File) Make as much as you want with the text you need. It's recommended to slow down this print given it's very fast anyway and slowing it down will improve the visual quality of the text For your own custom designs use a 9.9x50x1mm base to snap in place