About this 3D model

I redid the coloring in hueforge to get it more vibrant. 7 color print Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 1.6 PLA BambuLab Matte Dark Brown Transmission Distance: 1.9 PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 1.5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA PolyTerra Muted White Transmission Distance: 0.5 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Dark Brown At layer #12 (1.04mm) swap to Mandarin Orange At layer #15 (1.28mm) swap to Scarlet Red At layer #17 (1.44mm) swap to Lemon Yellow At layer #21 (1.76mm) swap to Muted White At layer #22 (1.84mm) swap to Ivory White for the rest.