About this 3D model

5 colour verison of penny wise the clown, 6 color avaliable in the print profiles soon (see images) 133x200 but can be scaled as needed (printed image is at 80% on X and Y) enjoy :) 5 color instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #14 (1.2mm) swap to Marine Blue At layer #15 (1.28mm) swap to Orange At layer #16 (1.36mm) swap to Dark Red At layer #19 (1.6mm) swap to Orange At layer #23 (1.92mm) swap to Ivory White for the rest. 6 color instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #14 (1.2mm) swap to Marine Blue At layer #15 (1.28mm) swap to Orange At layer #16 (1.36mm) swap to Dark Red At layer #19 (1.6mm) swap to Orange At layer #23 (1.92mm) swap to Lemon Yellow At layer #26 (2.16mm) swap to Ivory White for the rest.