About this 3D model

This Rally Dakar Truck 2024 is a model designed mainly for print-in-place. Mainly because It consists of two parts (chassis and cabin) which is easy to put on . No glue needed. Wheels are designed to spin. If you want to legally sell the printed models, you can get my permission through this link: https://www.patreon.com/Swah3d This is print in place, no supports required.Easy printing0.4mm nozzle0.2mm layer height15% infill3 wallsPLA works best ScalabilityYou can enlarge the model as you like, but if you want to reduce it, I recommend a maximum of 10%. If it gets too low, the wheels won't spin. Print OrientationAs the STL file is oriented This model is printed no supports, just make sure you have good adhesion to the bed. Print, enjoy and have fun!