About this 3D model

Summary Deck Box for MtG (Magic the Gathering) Commander. Features: Lid slides on so that deck cant fall out if shaked lid is held with magnets (15mm x 1,7mm) front has a slot for a top loader sides have a slot to take out deck so you dont have to drop it out lid covers these slots see print settings misc notes for printing instructions Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 2.8 for base, 2.0 for lid Infill: 10% Notes: i use 2.8 layer height for the base and tree support in cura for the lid you do not need support i print the base standing upright and the lid flipped - so you have to rotate both models 90 degree for the magnets i left a wall of 0.8 so you can have 2 walls if you print with a 0,4mm nozzle i insert the magnets while printing without pause - i just calculate the z-height where the slot is still open for 2 more layers and i add an m300 command there so my printer beeps and than i insert the magnet carefully