About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm (Feel free to add brim if you have adhesion issues), I would check the flush options (if you have AMS).For me 0.25 multiplier is good enough. You can resize it but don t change the height.Z height must be 1.80mm Also i have 1 AMS so i paused the print at the mid of red layer and changed the other spools. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite Purple Transmission Distance: 0.5 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA PolyLite Pro Light Yellow Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap Instructions: -- Start with Black At layer #9 (0.8mm) swap to Blue At layer #10 (0.88mm) swap to Purple At layer #11 (0.96mm) swap to Scarlet Red At layer #13 (1.12mm) swap to Light Yellow At layer #15 (1.28mm) swap to White for the rest.