About this 3D model

The Colosseum - Double Hueforge Recreate the Colosseum and hang it on the wall at home! With this double hueforge, with just 4 steps you can have a Hueforge reproduction of the Colosseum in Rome. Hueforge print Instruction: Background: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Coffee Transmission Distance: 3 PLA+ Esun Bone White Transmission Distance: 6 PLA+ Esun Light Blue Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Coffee At layer #14 (1.2mm) swap to Bone White At layer #16 (1.36mm) swap to Light Blue At layer #21 (1.76mm) swap to Bone White for the rest. Colosseum: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Esun Red Transmission Distance: 6 PLA+ Esun Yellow Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 6 PLA+ Esun Yellow Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #17 (1.44mm) swap to Bone White At layer #22 (1.84mm) swap to Yellow At layer #23 (1.92mm) swap to Bone White for the rest.