About this 3D model

NZXT cases have a unique and clean look. But most of them, including the H210, have bad airflow with the stock front panel. This model solves this issue and will make your PC breathe a ton of fresh air ! It fit perfectly on the case just like the original one. Things needed 4 10x2 round magnets 2 M3 Hex socket bolts 2 M3 square nuts Glue (can be any type from super glue to hot glue) Print None of the pieces require supports, I recommend printing them in at least 0.16mm layer height for the parts to fit nicely. To put custom text like I did on mine, you can do it directly in Bambu Studio on the right bottom part. Assembly For V1 : Simply insert the connectors in one of the two panels and assemble it with the other one, then you can glue everything together. (optional) Note : don't use black hot glue like I did on my first try if you print this model in white. For V2 : Screw both parts together with 2 M3 Hex socket bolts. Then glue the magnets on the four standoffs. Finally, remove the old panel and replace it with this one, don't forget to post a make and to tell me if you encounter any problems !