About this 3D model

Useful little box to carry 3 king size cones on you. Box outer dimensions are ~ 116 x 55x 16 mm. It has a logo in the top that can be painted in slicer using the fill tool - or use the provided profile, which has it pre painted. If you don't paint the logo, it won't show up in the print at all. To keep it closed, there's embedded magnets - the magnets are cylindrical 5mm diameter x 5mm length. Make sure you set them in in the correct orientation and set the pause at before layer 37 (if you print in 0.2mm layer) - or use the provided profile, it also has the pause set in the correct height. I'd recommend putting a drop of ca glue into the hole before adding the magnet to make sure it's in. If you use a steel nozzle, it could otherwise pull the magnet out when going over it.