About this 3D model

Hueforge design for the modern art of the Black Lotus card in Magic: the gathering. Source & credits for the original picture : https://www.rahnart.com/black-lotus Instructions : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Purple Transmission Distance: 1.4 PLA BambuLab Basic Magenta Transmission Distance: 3 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #22 (1.84mm) swap to Blue At layer #28 (2.32mm) swap to Marine Blue At layer #39 (3.2mm) swap to Lilac Purple At layer #40 (3.28mm) swap to Purple At layer #42 (3.44mm) swap to Magenta At layer #44 (3.6mm) swap to Lilac Purple At layer #48 (3.92mm) swap to Ivory White for the rest. Happy printing !