About this 3D model

Hello, although the filaments appear in the description are PETG, you can print PLA and you will get the same results. This PETG combination is the default in Hueforge for grayscale. The important thing above all is to have a good combination of light and dark gray and to obtain the best results. I hope you like it!! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #18 (1.52mm) swap to Gray At layer #25 (2.08mm) swap to White for the rest.