About this 3D model

just got bored Box: Valkyrie for CNChttps://www.thingiverse.com/thing:3892442 Valkyrie for CNC remix (fixed missing face on the back)https://www.thingiverse.com/thing:5166724 Slavic God Emperor (For CNC)https://www.thingiverse.com/thing:3909518 Freya buckle for CNChttps://www.thingiverse.com/thing:4123037 Handles: Viking arm ringhttps://www.thingiverse.com/thing:2369433 Lid: horses runninghttps://www.thingiverse.com/thing:507074 Legs: Table Louis XIVhttps://www.thingiverse.com/thing:3010495Print SettingsPrinter:Cr-10Rafts:YesSupports:YesResolution:.1mmInfill:20%Notes:The Cross bracing (supports) for the legs were designed solely to keep the legs from falling over when printing standing up. The one I printed no longer has these braces. If you want to keep them you could flip the box over. I tried to make the box so it wouldn't need supports when printing in this manner but nothing I tried worked. Alternatively place the box in ultimaker cura standing up. Move the box along the Z axis to -77.5 you can either just print this half or multiply the box and flip it over. Move this duplicate to -158.2969 and print. Removing the printed supports will be difficult but working slowly and carefully should allow you to remove the supports without breaking the cross bracing. SUPPORT SETTINGS structure: Normal Placement: everywhere Overhang angle: 60 degrees Support pattern: zigzag Support wall line count: 1 Line density: 5%line distance: 8mm roof thickness: .4mm floor thickness: .4mm