About this 3D model

**** DO YOU JUST LOVE THEM??? STAR RATE, SAY THANKS FOR YOUR SWEET CLICKY P'S!!!! ***** You have found Clicky Poppers. They're our most fidgetastic sensory wonders that not only CLICK, but POP and EVEN HOP into THE AIR!!!!! All four Clicky Popper designs are infinitely color customizable and print in LOW WASTE MULTI-COLOR, requiring only TWO filament changes per plate! All ages LOVE these tiny, handheld, ultimate pocket-pals which some play with for the squishes and clicks, and others for the pops and HIGH HOPS! Print & assembly: (watch here: https://www.instagram.com/p/DXcXY_DhZ0u/) Find elastics! (We use #32 and #33 rubber bands) Fold six ends inward, making a double layered flower shape, and loosen all the joints. Reopen and lay popper with flat side facing up at you. Fold in, Click in split connector to the DISK ... 1 at a time. Align a split connect between top/bottom disks and press firmly with 2 thumbs above connector, until it clicks in. Repeat with other split connectors, leaving the final one IF you'd like to..... That little pin is the auto popper pin. We DONT add the pin, for a POPPER that stays flat when squished (kids prefer this for drop-popping poppers). ADD THE PIN for a ball that POPS BACK after clicking, and it MAY also automatically pop in your hand and on surfaces once the joints are well "worked in"! Click PIN in the middle hole before final split connect. The last connection will need to be clicked against a flat object (we use a spoon handle) slid inside under the connector. See video above! Once you have assembled one, you can assemble ONE THOUSAND! We hope that you LOVE these fidgetastic POPPERS. Spool it up, Spooligans!!!