About this 3D model

Star Trek - Starfleet logo wall art. (Hueforge). See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Sunny Orange Transmission Distance: 8 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Skin Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #15 (1.28mm) swap to Sunny Orange At layer #19 (1.60mm) swap to Yellow for the rest. At layer #22 (1.84mm) swap to Black At layer #24 (2.00mm) swap to Blue At layer #28 (2.32mm) swap to Sunny Orange At layer #33 (2.72mm) swap to Skin At layer #36 (2.96mm) swap to White At layer #40 (3.28mm) swap to Black At layer #45 (3.68mm) swap to Red At layer #48 (3.92mm) swap to Sunny Orange At layer #50 (4.08mm) swap to Yellow At layer #52 (4.24mm) swap to Skin At layer #59 (4.80mm) swap to White for the rest