About this 3D model

English: This is a print bed holder that can be directly screwed onto the side of the P1P . This ensures that the print bed is securely and neatly stored, avoiding any obstructions. The angled orientation allows for easy insertion and removal of the print bed into/from the holder. Currently, the holder is available in three different types: Bambulab Textured Plate (thickness 0.9mm / 0.035 inch) Third-party textured print bed (thickness 1.2mm / 0.047 inch) Printbay Blackprint (thickness 2.0mm / 0.078 inch) For those without Blackprint, I recommend the version for 1.2mm plates, enabling the storage of various plates in it. Required Parts: 2x M3x4 Screw 2x M3 Washer 1x Buildplate Holder in the size you need 2x spacer for P1P Assembly: Insert the screw with washer into the two holes. Place a spacer on each screw from the back. Tighten the screws. Insert the plate. :D Enjoy printing! English: This is a Plate Holder that can be directly screwed onto the side of the P1P . This ensures that the build plate is securely and neatly stored and is not in the way anywhere. The angled orientation allows the build plate to be easily inserted into or removed from the holder. I currently have the holder in three different types. Bambulab Textured Plate (thickness 0.9mm / 0.035 inch) Third-party textured build plate (thickness 1.2mm / 0.047 inch) Printbay Blackprint (thickness 2.0mm / 0.078 inch) For those who do not have Blackprint, I recommend the version for 1.2mm plates, to be able to store various of these in it. Required Parts: 2x M3x4 Screw 2x M3 Washer 1x Plate Holder in desired thickness 2x spacer for P1P Assembly: Insert the screw with washer into the two holes. Place a spacer on each screw from the back. Tighten the screws. Insert the plate. :D Enjoy printing!