About this 3D model

Honeycomb Storage Wall with LED : Here is my version of the Honeycomb Storage Wall with a 1.4cm thick LED strip The piece is 90cm by 60cm Printing settings : - Layer height : 0.25 – 0.3 - Wall loops : 3 - Infill : 0 % - Brim type : Outer brim only Optional : Bottom surface pattern : Monotonic line All inserts are here : https://makerworld.com/en/models/22521#profileId-27457 You need : 4x « Hexagon-countersung-and-hole (2x) » 7x « Insert-countersunk » 8x « Insert-hollow-for (4x) » 11x « Cover-countersunk » Follow the instructions below for assembly and installation. Here is a video of the project : https://youtu.be/EOUkTK0voWo