About this 3D model

Summary: Grateful Dead Steal Your Face Magnet. This 3 inch (76mm) diameter magnet has four embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill, classic wall Magnets: Designed for four 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x2.8. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print. Filament changes: Color order for filament changes: white, red, blue, black If you stick with 0.2 layer heights: Layer 17 insert magnets Layer 20 change from white to red Layer 23 change from red to blue Layer 26 change from blue to black *Be sure to double check your slicer for layer pauses Links to other Grateful Dead Magnets: Dancing Bear 1: https://makerworld.com/en/models/236310#profileId-252452 Dancing Bear 2: https://makerworld.com/en/models/236252#profileId-252407 Dancing Bear 3: https://makerworld.com/en/models/236309#profileId-252451 Dancing Bear 4: https://makerworld.com/en/models/236300#profileId-252438 Dancing Bear 5: https://makerworld.com/en/models/236274#profileId-252419 Steal Your Face: https://makerworld.com/en/models/236241#profileId-252398