About this 3D model

Summary: Grateful Dead Dancing Bear Magnet (4 of 5). This 2.75 inch (70mm) tall magnet has three embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill, classic wall Magnets: Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x2.8. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print. Filament changes: Color order for filament changes depends on what you want. I did black, orange, green but feel free to be creative. If you stick with 0.2 layer heights: Layer 17 insert magnets Layer 19 change from color 1 to color 2 Layer 23 change from color 2 to color 3 *Be sure to double check your slicer for layer pauses Please upload your make - I would love to see your color schemes Links to other Grateful Dead Magnets: Dancing Bear 1: https://makerworld.com/en/models/236310#profileId-252452 Dancing Bear 2: https://makerworld.com/en/models/236252#profileId-252407 Dancing Bear 3: https://makerworld.com/en/models/236309#profileId-252451 Dancing Bear 4: https://makerworld.com/en/models/236300#profileId-252438 Dancing Bear 5: https://makerworld.com/en/models/236274#profileId-252419 Steal Your Face: https://makerworld.com/en/models/236241#profileId-252398