About this 3D model

St Louis Cardinals - MLB Hueforge This one was a special request that I worked on. The rest of my Major League Baseball Hueforges can be found in the collection here: https://makerworld.com/en/u/4065522623/collections/549671 I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. If you use my profile, but try and change the layer heights you will need to use the mm measurements instead of the layer number because of this adaptive layer height. Final Size is 200x200mm If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position If you like my work and want to leave a tip to help with the costs of filament donations can be made here: https://www.paypal.com/donate/?hosted_button_id=9BVH6Q453Y2K8 Please post a picture of your printed copy! I'd love to see it! — Printing Instructions--- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0 PLA Sunlu Red Transmission Distance: 5.1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Generic White Transmission Distance: 3 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #17 (1.44mm) swap to Blue Gray At layer #22 (1.84mm) swap to White for the rest.