About this 3D model
Paper rose .. picture generated by AI There are several variants of colour combinations try also new and show us your colour combos :-) ############################################################################# B&W - variant Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA JakobFIlament Black Transmission Distance: 0.3 PLA 3Dpower Grey Transmission Distance: 2.7 PLA 3Dpower Light Grey Transmission Distance: 0.4 PLA Jamghe White Transmission Distance: 5.2 Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Grey At layer #22 (1mm) swap to Light Grey At layer #34 (1.48mm) swap to White for the rest. #################################################################### Red variant Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA JakobFIlament Black Transmission Distance: 0.3 PLA 3Dpower Red Transmission Distance: 5 PLA Aurapol Orange Transmission Distance: 4.4 PLA Jamghe White Transmission Distance: 5.2 Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Red At layer #22 (1mm) swap to Orange At layer #34 (1.48mm) swap to White for the rest. #################################################################### Yellow variant Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA JakobFIlament Black Transmission Distance: 0.3 PLA Aurapol Orange Transmission Distance: 4.4 PLA Jamghe Yellow Transmission Distance: 2.8 PLA Jamghe White Transmission Distance: 5.2 Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Orange At layer #22 (1mm) swap to Yellow At layer #34 (1.48mm) swap to White for the rest. #################################################################### Blue variant Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA JakobFIlament Black Transmission Distance: 0.3 PLA Jamghe Blue Transmission Distance: 5 PLA JakobFilament Light Blue Transmission Distance: 3.2 PLA Jamghe White Transmission Distance: 5.2 Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Blue At layer #22 (1mm) swap to Light Blue At layer #34 (1.48mm) swap to White for the rest. #################################################################### Pink variant Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA JakobFIlament Black Transmission Distance: 0.3 PLA JakobFilament Ping Transmission Distance: 2.4 PLA Jamghe Yellow Transmission Distance: 2.8 PLA Jamghe White Transmission Distance: 5.2 Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Ping At layer #22 (1mm) swap to Yellow At layer #34 (1.48mm) swap to White for the rest. ############################################################################# "Loving my content? Show some love with a thumbs up ?❤!" Enjoy :-)