About this 3D model

Since wooden panels are not sold separately, I wanted to make one. It should be completed just by gluing with a thin board. I think PLA is fine, but we recommend printing with a durable material such as ABS. This is because PC cases are hermetically sealed and tend to trap heat. I divided it into two so that it can be printed at a general 235x235. A full size frame is also included. The magnet part has a 4.5mm hole. There are 3 types of depth. Use 3mm counterbores and through holes and M4 countersunk screws. Models using M4 have not been tested.