About this 3D model

This is a slightly narrower version of Robert Cowan's modular drawers. I realigned the PVC holes in the faceplates and rear support. This allows it to print properly on the print bed. I have also included a modified gcode to be used when printing the frame if you would like. All original parts and materials will fit and the spools will all fit as well. In my use, I have found that it's a good idea to keep the lighter spools of filament at the back of the drawer so it lowers the chance of the pvc bending and causing the rear support to hit the bottom of the frame when opening and closing (likely because i used PLA instead of something stronger like ASA or ABS). All in all it works, I love it so far, and i'll be working on printing it with a stronger infill to see if i can strengthen the PLA more. Parts List Here is a list of some of the parts necessary. Some of the links are affiliate links, but you can source your own if you want! ½" PVC Pipe (the design is made for schedule 40, commonly found at every hardware store) Lontan Drawer Slides #6 3/8" wood screws (for attaching drawer slides, 8 per module) #6 5/8" wood screws (for connecting modules, faceplates, middle supports. 20 required per module, additional for connecting modules together) ½" Cabinet Door Bumpers (3.5mm tall, 2 per module)