About this 3D model

Spider-Man: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to Blue At layer #14 (1.2mm) swap to Red At layer #29 (2.4mm) swap to Lemon Yellow At layer #34 (2.8mm) swap to Jade White for the rest.