About this 3D model

These parts are for the I3 Rework by eMotion Tech. http://www.thingiverse.com/thing:119616 UPDATE 4-9-2015: I added all my other improvents that I have designed since I uploaded the first 2. I liked the look of their design. But after putting it together there were 2 things I wanted to improve. First. My stepper motors were a bit on the big end of the tolerated size (42.3mm wide) This caused an alignment error in the z axis of the M5 threaded rod and the x ends. I increased the room around the motor. Also I added a ridge to align the motor mount with the frame. Second. I really liked the idea by ffleurey to protect the z-axis smooth rods against the x belt tension. http://www.thingiverse.com/thing:160636 Update 12-3-2014 : 3 Upgraded the Y tensioner for 624zz bearings. It is retrofittable without removing any threaded bars.Just cut off the old tensioner. 4 Made a few modifications to the x idler tensioner to prevent alignment problems. UPDATE 4-9-2015 5: I designed and tested a pulley with barreled shape for the belts. It centers the belt automatically so it does not rub the sides of the pulley. 6: I designed a holder to mount the original Rework extruder as a bowden extruder. 7: I added braces to the frame. They can be assembled without modifiing the original parts. 8 I added brackets to mount the megatronics V2 box 9 I replaced M5 nuts in x axis ends by long M5 connector nuts to smooth possible errors in M5 thread. 10 I placed the whole printer in a IKEA STUVA cupboard. Works perfectly for ABS printing in "heated"chamber. http://www.ikea.com/nl/nl/catalog/products/S69873735/ I designed the parts in Freecad. http://www.freecadweb.org/