About this 3D model

Here is a Vaporeon V Hueforged Pokemon card! I completed this with one AMS, replacing the black in slot one once it was completed with the white that is needed as the last colour. This can be completed without an AMS as well, you just need to manually pause the printer at the layer lines below and change the filament colour. If you don't have the exact same colours, feel free to try others while keeping the Transmission Distance similar. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA Bambu Lab Magenta Transmission Distance: 3.4 PLA 3D Fillies Sky Blue Transmission Distance: 5 PLA InkStation White Transmission Distance: 10 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Blue At layer #10 (0.88mm) swap to Magenta At layer #12 (1.04mm) swap to Sky Blue At layer #16 (1.36mm) swap to White for the rest.