About this 3D model

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm *You dont need a .2 nozzle, i printed this with a .4 nozzle with the layer height at .04 Filaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5 PLA BambuLab Tough Black Transmission Distance: 0.6 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Red At layer #11 (0.56mm) swap to Yellow At layer #28 (1.24mm) swap to Black At layer #33 (1.44mm) swap to Ivory White for the rest. I also made a frame if you wanted to use that as well. If you put it up to the light without a frame it also shines through. Boost Me