About this 3D model

The Dragon Page Keeper is an illuminated dragon in a cape reading an open book, designed to sit right on top of an LED tea light https://a.co/d/edgb6Xs or an RGB puck light https://a.co/d/dZVWg0A I also made a larger version for a plug-in LED puck light (There are many options of these types of lights out there. Just know the opening is 63mm) https://a.co/d/1CJ61HP This model comes in two sizes: Small (38mm opening) – fits 1.4inch LED tea lights. Large (63mm opening) – scaled up with adjustments to fit brighter LED puck light. I recommend printing in a single light or translucent filament to maximize the glow. For the larger version, I finished it with gold, silver, and black Rub ‘n Buff, and the results were stunning! This model was heavily requested after the Pumpkin Page Keeper release, and I think this dragon version will be a perfect addition for book lovers and fantasy fans alike! Walls: 2 Infill: 5% gyroid Supports: Strong Tree supports on (critical regions only) Layer Height: 0.20 mm Filament Usage & Print Times (Bambu Lab A1 tested)Small Version (38mm LED slot) Single Color: ~111g | 8 hrs Multicolor (4 colors): ~393g | 29.5 hrs Can reduce to 3 colors if removing the white book page layer Best printed in batches to save time and filament Large Version (63mm LED puck slot) Single Color: ~315g | 18.5 hrs I did not color the large version because it would take several days and far too much filament Let me know what you think! Happy printing,Christian, @CraftyKid3D