About this 3D model

Summary This is a cover for the back of the HicTop Prusa i3 display. The original file was for the thin controller, 32mm in my case, I've added a 40mm one for the larger types of controller boards It's available to copy/edit yourself on OnShape as: https://cad.onshape.com/documents/e9f30777d5d77901d0deadcf/w/9561c50246035fe5ff4d5ecd/e/912c6942e84dae37412221c2 Print Settings Printer: HicTop Prusa i3 Rafts: No Supports: No Resolution: 0.15 Infill: 50% Notes: I'd recommend PLA with the fan on, otherwise the SD card slot will need some support, plus you'll need to flip it so it prints with the top on the bed.