About this 3D model
Zelda Silhouette - 8 Colour Legend of Zelda Hueforge This is to complement the Link Silhouette print that I uploaded previously. It and my other Nintendo Hueforge can be found here: https://makerworld.com/@CanadianGamer/collections/835925 I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same! If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position Please post a picture of your printed copy! I'd love to see it! Friction Fit Frame design here for 200x200 Hueforges https://makerworld.com/en/models/381229#profileId-281475 And if you scale it down, I have frames for 100x100 or 150x150 here: https://makerworld.com/en/models/173529#profileId-190705 If you like my work and want to leave a tip to help with the costs of filament donations can be made here: https://www.paypal.com/donate/?hosted_button_id=9BVH6Q453Y2K8 — Printing Instructions--- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 2.1 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Marine Blue Transmission Distance: 3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA Bambu Basic Gold Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Generic White Transmission Distance: 3 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Dark Blue At layer #13 (1.12mm) swap to Marine Blue At layer #17 (1.44mm) swap to Ice Blue At layer #19 (1.6mm) swap to Gold At layer #20 (1.68mm) swap to Orange At layer #22 (1.84mm) swap to Yellow At layer #24 (2mm) swap to White for the rest.