About this 3D model

This print allows you to mount an ABUS SH6500 Bordo Xplus bike lock to a Juiced Bikes Scorpion X2 Ebike. This model will likely work with older scorpion models, but I have not tested this. This was printed in PETG for weather resistance, but all prototyping for this part was done in PLA. PLA may work okay for this application. ( I recommend using 3-4 walls if using PLA) Infill at 25% - 35% is recommended. This model is designed to use minimal supports. Print in the default orientation with supports everywhere enabled. I suggest adding support blockers in the mounting and tracker holes as support is only needed for the notch. If you are using PETG, I would consider this mandatory because support materials and PETG do not get along.