About this 3D model

This model is one that I created earlier this year and was really excited about but it had some issues and I couldn't get the feet to function properly and I moved on to creating different models and this little ducky sat around until I just looked at it again and it hit me hit me how to fix the feet and now they work great. When printed at 100% this little ducky is 2" tall and the same size as all of the other little rubber duckies you see all over the place and looks just like one until you pick it up. When lifted up the feet fall out of the bottom and the little ducky stands up. I have successfully printed them at 50%. (If Printing at 50% the feet may have to be initially broken free but they do function them.) For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file. For anyone who cannot use a 3mf file the stl files are located in the zip file attached. ALL of these designs are printed with NO supports & NO Brim. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mm (Maximum) layer height. I use the 4 Color AMS system to print the models in color. Updated File: The update 3mf file includes a third wall and increased flushing volumes from 0.5 to 1.5, I also selected the "Flush into Objects Infill" option in the Strength Tab. Please note I have never used the Flush into objects Infill option before so I am running parts now but I wanted to share the improved file in the meantime. I will Update tomorrow when the parts are done. I apologize if anyone already printed these with color bleed. I am tweaking settings to fine tune the model and I appreciate the feedback. Please let me know if you have any questions. Thank you! Mike