About this 3D model

So this is a bigger print if you want it to hold pens, but I quite loved the way it turned out. The theme here is that the caldron tipped over and the Witch's familiars are trying to fix it before the potion causes more problems than flying frogs and bunny frogs. This piece is more decorative than holder; if you size it down and still plan on using it as a pen holder, half the length of the pen needs to fit in the cauldron/on spilling potion or they may not stay in. For those looking for a multicolor version, I included a five color 3MF version. The potion 'purple' and frog 'green' slots could be swapped for the orange of the owl's feet, beak and eyes. On the pop up screen select either the green or purple slot for the orange fifth roll, and just be sure to manually swap that roll for orange before the top of the cauldron is reached. Print Settings: Print in Place No Supports needed 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray Smaller one printed at 70%.