About this 3D model

This box is designed to hold a 100mm X 100mm X 4mm flat lithophane panel, and prints in 2 pieces that slide together with no fasteners needed! Video on how the box comes together can be found here:https://youtu.be/0dgPZD34-58 In order to print the litho panels, you will need to create the STL files for the litho panels yourself following the instructions below. Creating the Litho STL’sTo create the STL Files for the Litho Panels: Go to https://lithophanemaker.com and select the flat lithophane maker. Select ‘Choose File’ to upload the photo you want to use. Scroll down and adjust the X-Shift and Y-Shift to get the photo cropped how you want. Most of the stock settings are fine how they are, but these are the settings that will fit the boxes:Resolution: 0.2Width: 100 mmHeight: 100 mmDepth: 4.0 mmBase Height: 4.0 mmOverhang Angle: 45 (I just choose 45 so it will be nice and clean)Maximum Thickness: 3.0 mmMinimum Thickness: 0.6 mm Enter your email address and hit ‘Create .stl’ If you purchase this STL, you are free to print and sell the design.