About this 3D model

Multi-Colored Modular Roads PLEASE NOTE: These will require a multi-color printer and I have tested them on a Bambulab P1S. Designed roughly for 6mm / 1:285 scale, this set of modular road parts includes 26 two-lane and23 four-lane roads, with and without battle damage for a total of 94 road sections. Each section of road can be printed in 2 or 3 colors, examples in photos are all 2 colors. It should be easy to scale up or down to other layers, but I recommend leaving the height the same and just scale the X and Y azis. I'm personally using them for Battletech Alpha Strike - they're not suitable for the Classic rules with hexes. The road sections are 1mm thick, with the road markings 0.2mm thick. They're all orientated to print upside down with the road markings in the first layer to give them a smooth surface. The 3mf files all expect a white or light grey (light grey actually worked better for me) filament in the first slot, and the black filament in the 2nd slot. If you want to separate the yellow (or other color) markings, they're defined as a separate object within the 3mf file so you can assign your color to it before printing. If you print at 0.2mm layer height, there should only be two color changes, minimising filament waste.