About this 3D model

***No Axolotl Flexi included*** *This is a multipart file if you want it to look like the above pictures. Glue is required to put the Bathhouse together, and to keep the baskets on the onsen rocks from moving. Print Settings: No Supports needed 2-3 walls 5-10% infill Ironing all top surfaces (everything but baskets and Onsen) If you have adhesion issues, try a brim, glue stick or Aquanet hairspray The Multicolor 3MF file has all parts included on 5 plates, with the layer changes already set up. There are more than four colors in the filament panel - Don't panic! Each plate only uses four or less. I originally printed the onsen rocks separately, but it was a pain to click the water in, so they are combined now into a layer color change. I have made an instruction PDF noting which height to put pauses or layer changes in for the stls. Keep in mind - If you change the size of the objects, you will either need to keep the Z scale the same or redo the layer color changes. Filaments Used: Bambu Basic - brown, yellow, cyan, magenta, siliver, blue. Naga white, Aceaddity black Bambu matte pink. I also swapped the white and black for Bambu silk white and Eryone burnt titanium purple for the sign.