About this 3D model

This is the Mini Punch Bag! The idea was sitting in my head for some time now and with all the springy designs I've been making it felt like the right time to work on this one! This is a modular design and each part is printed separately - All parts screw together so it's a glue-free assembly! The punch bag uses a clamp to attach to the table - I included 2 sizes. I also added a Pumpkin shaped punch bag and I might include a few more if you'll like the design! There are 3 springs: Spring - Thinnest version may be too weak to hold depending on scale and material. Spring_2 - This is the recommended one to use Spring_2_High - Same as 2 just 15%-20% higher. I included several versions as if you scale BIG you may want to use the thinner one - I did not test bigger sizes but will later on. Please read printing instructions: All parts except the punch bags should be printed with at least 3 walls and 20%+ infill to make Punch bag should be as light as possible so 2 walls and not more than 5% infill (Or even lightning infill). Supports To make sure the springs print and are stable at the end you need to add custom supports or auto supports with blockers. Please look at the the attached image for Cura & Bambu slicer for reference on how that should look. Scaling: I tested 100% & 60% which worked great If you want to get access to all my models or sell my prints commercially, you can join my Thangs: https://thangs.com/designer/3DGeex Use Code 3DGXTHANGS to get a 25% discount for the first 3 months (Valid until End of October) And a kind request, Please help supporting the work of all 3D artists! Do not sell or share digital files bought here and on other sites. Buying this model DOES NOT allow you to sell physical copies of it, It is for personal use only.All my original designs are Copyright protected. Check out my social media accounts to see what I'm doing next:instagram.com/3dgeextiktok.com/@3dgeexyoutube.com/@3dgeex Thanks, Michael - 3DGeex