About this 3D model

Pumpkin Cottage Display This month's display is a single piece print, no supports needed. Bambu Studio will want to put a support in for the archway in front of the door, but I have printed at 100% and 65% fine without it. I'll be working on turning it into a small dice tower tonight as well, but that might look slightly different from this one as I'm thinking of adding a bump at the front to keep the dice from rolling off. I have included a 3MF multicolor file, but I heavily suggest scaling it down (with my typical settings it takes over 2 days to print!). For the 65% size model, I just layer color changed after the grass printed. ****Updated to include a Dice Tower Version and Tealight Version Print Settings: Print in Place (Tea light is two part) No Supports needed 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray The 100% white model was printed at .08 layer height and sprayed with primer, so that I can paint it. Filaments used: Pumpkin Cottage Display: 100% - Elegoo white, 65% Bambu matte green and Kingroon tricolor red, yellow, blue silk