About this 3D model

An amazing set of grimdark gothic ruins from the Gothic Sector Templaris Part 2 campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-templaris-part-2-3354). IMPORTANT NOTICE : This set has been originally designed for the 10th Edition. I didn't changed the buildings but they still fit the new Terrain Area, but are not the exact size of the official plastic buildings and the floor is 5 inches high. It's compatible with 11th edition and usable in competitive, however if you are the kind of player who want the exact size of the official plastic buildings, this set is probably not for you. Buildings can be printed in multicolor with FDM printer that allow this feature. 3MF files already configured for multicolor print supplied. It includes :-4 two storey buildings-4 ruins (less than 2" tall)-Monument-Long Ruin-Short Line High Ruin-Short Line Small Ruin Terrain Area are available for free in my store : https://www.myminifactory.com/object/3d-print-w40k-11th-edition-building-footprint-terrain-area-set-free-813250 It also includes legacy building from the 10th edition, that you can also use as alternatives :-1x U-Shape building-2x L-Shaped buildings-2x Inverted L-Shaped buildings-3x ruins (less than 2" tall) Every parts can be printed on FDM printer (20x20 cm or higher) and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))For FDM printer : no support needed, it's print-in-placeFor SLA printer : Pre-supported version available. Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.