About this 3D model

Yay Lemon Sharks! For kicks I added a quick alternate form to that - two little barbels on the nose so that it can be printed as a Nurse Shark as well. STL/3MF Multicolor regular/ 6mm eye sockets Lemon/Nurse shark Print Settings: Print in Place No Supports needed Arachne walls 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray - if you typically have problems, I would highly recommend putting a brim on the final body part before the tail. This part has the least amount of contact with the plate. Test printed successfully down to 75%, YMMV.