About this 3D model

HAMSTER - BOXEDABLES Say hello to this adorable little hamster chilling in its box! This cute, print-in-place model is perfect for anyone who loves small, fluffy friends. ✔ Print-in-place✔ No supports✔ Optimized for multi-color printing (3MF file included)✔ Keychain version included Sample printed with Bambu Lab A1 Combo. ? PERSONAL USE ONLYPurchasing or downloading this file does not give you the right to sell physical prints of this design. SUPPORT ME ON PATREON: ? patreon.com/BOXEDABLES ⚖️ COPYRIGHT PROTECTED FILESYour purchase does not give you the right to sell or distribute the digital files in any way. ? GET A FREE PAID MODEL? Print & tag me on Instagram with #boxedables! DM me after posting, and you'll get 1 paid model for free. ? instagram.com/boxedables (This offer applies only once per account.) ⚙️ RECOMMENDED SLICER SETTINGS: Layer Height: 0.16mm Initial Layer Height: 0.2mm Line Width (Initial Layer): 0.55mm Elephant Foot Compensation: 0.1mm Precise Z Height: Enabled Wall Order: Outer → Inner Wall Loops: 6 Infill Density: 20% Infill Pattern: Gyroid Initial Layer Speed: 25mm/s Infill Speed: 80mm/s Seam Alignment: Aligned or Back (Paint the seam at the back of the model for a clean finish.) Heat Bed Temperature: 50°C (for PLA/PLA+ to prevent elephant foot) MODEL SIZE: ? 4x4cm Clone the objects to minimize material waste. ⚠ PLEASE NOTE: If you scale the model, you may need to add supports for proper printing. If you have any questions, feel free to ask. Happy printing! ?