About this 3D model

FOR PERSONAL USE ONLY, All my files are protected by Copyright, should NEVER be shared, resold or remixed.For commercial License to legally sell physical print of my design subscribe my Tribe or Patreon. It's finally here: the tic-tac-toe tower!This set is super handy for carrying around, moving, and of course, playing. And it's not just for tic-tac-toe!The tower is glued to the base on three sides (left, right, and back). There's a secret flap on the base that lets you slide the game board in and out easily and neatly (remember it's a rectangle, not a square, so it only fits in from those two sides!).The windows and the gate also need to be glued to the tower. I use cyanoacrylate, or any good glue for PLA or PETG. The lid closes perfectly, letting you store all the game pieces securely and neatly (in this case, there are 2 of each type). I printed 5 of each type in multicolor, which takes about 6 hours at high quality with a 0.16 layer height—but you can definitely speed it up if you want!I can't wait to see how the chess set turns out! I would like to receive your feedback. Have fun and don't forget to show your results! Settings: LAYER: 0.16 - 0.20 OUTER WALLS: 2 - 3 - INFILL: 10 - 15% - SUPPORTS: NO - Z-HOP: 0,8 - BRIM: If necessary Instruction and Tips: Printed with bambulab at a high quality setting and a 0.16 layer. Good calibration and retraction is necessary for a great result.