About this 3D model

This compact tool helps you insert magnets with the correct polarity—quickly, easily, and consistently. It’s designed for use with small embedded magnets (1/32" x 1/16") glued permanently into each end of the applicator. Each end is marked with a “+” (positive) or “–” (negative) symbol to indicate the outward polarity of the embedded magnet. IMPORTANT: Make sure they are installed with opposite polarities facing outward, as indicated by the "+" and "–" markings. Allow glue to fully cure before use. Instructions: Place a magnet for your project onto either the "+" or "–" end of the applicator, depending on which polarity you need to insert. The embedded magnet inside will hold it in place magnetically.Apply a small amount of glue to the exposed face of the magnet you're inserting.Press the magnet into the destination object (e.g., a miniature, model piece, lid, or base). Hold for a few seconds while the glue begins to set.Remove the applicator—the new magnet will remain embedded in your item with the correct polarity.Repeat the process with the opposite end of the applicator for the second magnet. When the two items are brought together, the magnets will attract properly and align perfectly. This applicator is intentionally compact to fit in tight spaces and work with various magnet sizes, making it ideal for miniatures, model kits, hobby builds, and other small-scale projects.